Re: PE sheets

• To: tesla-at-pupman-dot-com
• Subject: Re: PE sheets
• From: corr-at-enid-dot-com (by way of Terry Fritz <twf-at-verinet-dot-com>)
• Date: Fri, 18 Dec 1998 11:31:36 -0700
• Approved: twf-at-verinet-dot-com

Hiya Kevin,
I'm sure others will disagree, but I think that as long as the bumps are not
holes, it should be fine.  Since you have already purchased this plastic, you
might as well go ahead and give it a try.  It may just last as long as
anything
else.

Jeff Corr
Oklahoma Tesla Coil Builders Assoc.
corr-at-enid-dot-com

>a while ago, i bought a whole bunch of PE sheets.  later, i found out that
>it wasn't agricultural grade, but rather construction grade.  i noticed
>that the agricultural grade was more or less perfectly smooth, while the
>stuff i have seems to be bumpy.  before i waste a lot of time and effort,
>should i not use this in my caps?  i have a feeling i have the wrong plastic.

• Prev: Re: Weird Magnifier output
• Next: Re: Tesla Book Company fax number?
• Index(es):
  • Main
  • Thread