Re: 813 basing

• To: tesla-at-pupman-dot-com
• Subject: Re: 813 basing
• From: Ed Phillips <evp-at-pacbell-dot-net> (by way of "Terry Fritz (moderator)" <twf-at-verinet-dot-com>)
• Date: Sun, 06 Dec 1998 07:42:09 -0700
• Approved: twf-at-verinet-dot-com

Tesla List wrote:
> 
> Original Poster: Parpp807-at-aol-dot-com
> 
> The 813 requires a GIANT 7-pin socket and a plate cap.
> Bottom view with the two large pins towards you: the LH large pin is pin # 1
> 1-7  fil
> 2     nc
> 3     grid 2
> 4     grid 1
> 5     grid 3 and internal shield
> 6     nc
> 
> Where can  get plans for tube coils?
> 
> Ralph Zekelman

	I would think you could make connection to the pins with small metal
clamps a lot more cheaply than you can buy a socket, and just as
satisfactorily!

Ed

• Prev: Re: Counterpoise?
• Next: Re: Horizontal RF ground ?
• Index(es):
  • Main
  • Thread