[Prev][Next][Index][Thread]
rolled caps
----------
From: Jeff Corr [SMTP:corr-at-enid-dot-com]
Sent: Sunday, April 19, 1998 8:29 PM
To: Tesla List
Subject: Re: rolled caps
Kevin, trial and error work so much better :-)
I know from the past, plate size of 24x65 will get you
around .0125uf with 90 mils between each plate (around
30kv)
>#1......
>
> 0.224 x K x A
> C = ------------- x (N - 1)
> D
>
>C = Capacitance (in microfarads)
>K = Dielectric constant
>D = Distance between plates in inches
>A = Area of plate in inches
>N = Number of plates
>
>and....
>
>#2.....
>
> 2.248965 * 10^-7 * K * A
>C (microfarads) = ------------------------------------ * (N-1)
>K=dielectric
>const.
> d
>
>!!!Again, you need to multiply this result by 2 for a rolled up cap.
>This is the formula I generally use when making homemade caps.
>
>ok, so which one is the right one?
>
>thanks,
>Kevin
>
>
>