Plans for RSG

• To: "'Tesla List'" <tesla-at-poodle.pupman-dot-com>
• Subject: Plans for RSG
• From: Tesla List <tesla-at-stic-dot-net>
• Date: Wed, 24 Sep 1997 18:09:11 -0500
• Approved: tesla-at-stic-dot-net

From: 	DR.RESONANCE[SMTP:DR.RESONANCE-at-next-wave-dot-net]
Sent: 	Wednesday, September 24, 1997 2:15 PM
To: 	Tesla List
Subject: 	Re: Plans for RSG

To: Rodney

Send us a $3.00 postage stamp (priority mail) and we will send some
drawings that might be of assistance.

DR.RESONANCE-at-next-wave-dot-net


> 
> 
> Rodney[SMTP:rstapivic-at-sprynet-dot-com]
> Sent: 	Tuesday, September 23, 1997 6:48 PM
> To: 	Tesla List
> Subject: 	Plans for RSG
> 
> Hello everyone,
> 
> I've been lurking on this list for the past 3 months, and spending a
> considerable amout of time reading through the archives.  Currently I
have
> been building a coil in my spare time:
> 10.5" in diameter
> 35" total winding length of #22 enameld magnet wire
> Primary is 1/2" copper tubing spaced 1/4" for a total of 15 turns.  
> I'm going to power this coil using a 14.4 kv-10 kva pole pig.  My
question
> is: would anyone have plans for an asynchronous RSG?  I'm familiar with
> construction (IE: using Tungsten electrodes, G10 Phenolic for rotor,
ect.).
>  Thanks for all the great info I have found on this board.
> 
> Thanks,
> Rodney
> 
> 

• Prev: And what of the FCC?
• Next: Sync Motors
• Index(es):
  • Main
  • Thread