Secondary voltage measurement.

To: "'Tesla List'" <tesla-at-poodle.pupman-dot-com>
Subject: Secondary voltage measurement.
From: Tesla List <tesla-at-stic-dot-net>
Date: Sun, 21 Sep 1997 23:25:41 -0500
Approved: tesla-at-stic-dot-net

From: 	DR.RESONANCE[SMTP:DR.RESONANCE-at-next-wave-dot-net]
Sent: 	Sunday, September 21, 1997 8:10 PM
To: 	Tesla List
Subject: 	Re: Secondary voltage measurement.

To: Greg

We used the peak potential to power a 2 MEV x-ray tube and measured the
value of the x-ray energy.  Previously published this work in TCBA news
letter several years ago.

DR.RESONANCE-at-next-wave-dot-net

> 
> From: 	Greg Leyh[SMTP:lod-at-pacbell-dot-net]
> Sent: 	Saturday, September 20, 1997 3:07 PM
> To: 	Tesla List
> Subject: 	Re: Secondary voltage measurement.
> 
> DR.RESONANCE wrote:
> 
> 
> > A spark discharge of nine feet from a medium to large size TC with good
> > design parameters represents a potential difference of 1 million volts
(1
> > MEV).  On the system we conducted the original measurements many years
ago
> > the primary cap was .05 MFD, power level 6.5 kva, and sec. coil was 20
inch
> > dia with a 30 x 7 inch toroid.  Hope this gives you an approximate
> > reference.
> 
> How did you come up with the 1 MV value?
> 
> 
> -GL
> 
>