Re: tube advice needed

To: tesla-at-poodle.pupman-dot-com
Subject: Re: tube advice needed
From: Tesla List <tesla-at-stic-dot-net>
Date: Fri, 30 May 1997 08:38:58 -0500
Approved: tesla-at-stic-dot-net

Subject:  Re: tube advice needed
  Date:  Thu, 29 May 1997 10:18:09 -0500
  From:  David Huffman <huffman-at-FNAL.GOV>
    To: Tesla List <tesla-at-pupman-dot-com>


snip
Think about how you might allow the second tube, in a back to back
arrangement, to bounce at the primary voltage swing and still have
access to the filament and grid. Not an easy task, especially with RF
signals flying around.
Dave Huffman 

> > power in it though!!!)  Keeping the Thyratrons' grid hot
(positive) will
> > attempt reverse conduction and sparks fly in the tube as all sort
of
> > ablation takes place.  Two phased hydrogen Thyratrons back to
back seem
> > interesting, but I have had no time to investigate further due to
work
> > at my
> > real job.
> > 
> > Richard Hull, TCBOR
> 
> Thanks Richard, for the report on the hydrogen thyratron. I guess I
will
> shelve my CX 1140 unless I can get another, AND, someone says that
they
> work good.
> 
> Gene Lambert
>