Re: Refining 10kv -at- 23ma

• To: tesla-at-poodle.pupman-dot-com
• Subject: Re: Refining 10kv -at- 23ma
• From: Tesla List <tesla-at-stic-dot-net>
• Date: Sun, 25 May 1997 18:24:12 -0500
• Approved: tesla-at-stic-dot-net

Subject:  Re: Refining 10kv -at- 23ma
  Date:  Fri, 23 May 1997 10:04:33 -0400 (EDT)
  From:  FutureT-at-aol-dot-com
    To:  tesla-at-pupman-dot-com


> diameter stovepiping ellbows for about 1.25 feet across toroid. I get
> about 5 to 6 inch good discharge and can see corona out to about
> 8 or 9 inches. The funny thing about this setup is that it doesn't
> discharge unless there is a ground in proximity to it.
> Any suggestions? >>

Tristan,

It could be that your tune-point is not correct using this toroid,
or the toroid may be too large, but usually stovepipe toroids
discharge somewhat easily due to their uneven shape, still, 
toroid may be too large.

Just a couple of thoughts,

John Freau

• Prev: Re: Is This Neon Trans. Worth Fixing?
• Next: Northern Colorado Hamfest...
• Index(es):
  • Main
  • Thread