Magnet design question]

• To: tesla-at-poodle.pupman-dot-com
• Subject: Magnet design question]
• From: Tesla List <tesla-at-stic-dot-net>
• Date: Fri, 07 Mar 1997 15:26:38 -0600
• Approved: tesla-at-stic-dot-net

-- BEGIN included message

• To: tesla-at-pupman-dot-com
• Subject: Magnet design question
• From: Stanley Wilson <microres-at-crl-dot-com>
• Date: Thu, 6 Mar 1997 06:38:43 -0800 (PST)

While not a tesla generator question, I suspect that someone on this list 
has the expertise to answer my questions.

I want to build a 20,000+ gauss U shaped magnet for use on a small 
cyclotron.  I am trying to determine what grade of steel I should use 
that could be purchased from a commerical steel supplier.  I am going to 
need about 6'x6"x6" and it will weigh about 1400 lbs.  I am looking for 
articles, books, etc. on electro magnet design.

Any hints, information would be appreciated.  Thanks,  -Stan-

-- END included message

• Prev: [Fwd: Re: Just a brush]
• Next: [Fwd: Alleged 40 foot coil - prove it!]
• Index(es):
  • Main
  • Thread