[Prev][Next][Index][Thread]
Re: additional layer of windings
From: Jeff W. Parisse[SMTP:jparisse-at-ddlabs-dot-com]
Sent: Wednesday, July 23, 1997 11:09 AM
To: 'Tesla List'
Subject: RE: additional layer of windings
Ian,
Multi-layered coils won't work. Think about it: the voltage difference between layers will be huge and will overcome almost any wire insulation. Hobbyists coils are always single layer. Use a different secondary form if you need more/less wire on your secondary.
Jeff W. Parisse
Art Director, Digital Design Laboratories
www.ddlabs-dot-com 1-800-796-1138
----------
From: Tesla List
Sent: Wednesday, July 23, 1997 10:24 AM
To: 'Tesla List'
Subject: additional layer of windings
From: chestnic[SMTP:chestnic-at-cvn-dot-net]
Sent: Tuesday, July 22, 1997 5:34 PM
To: Tesla List
Subject: additional layer of windings
If you would put on an additional layer of wire windings over the
secondary, witch way should the layers go? I want to i want to increase
the number of turns and not worry about arcing.
Ian Chesnick
8 Champion tr
Fairfield PA USA 17320
chestnic-at-cvn-dot-net
717 642-8888