Repost: Have secondary, need design.

From: 	Aaron Cake[SMTP:cake-at-execulink-dot-com]
Sent: 	Saturday, July 12, 1997 3:37 PM
To: 	Tesla List
Subject: 	Repost: Have secondary, need design.

I'm not sure if this got out before the list crashed, so here it is again.
Any help would be great.

I have a secondary from a coil I made years ago  that never worked very
well. I am hoping to build another (working) coil using the secondary and
capacitor from that first coil. The secondary is wound with approx. 962
turns of 28 AWG wire on a 3 inch ABS pipe. It stands about 14 inches tall.
The capacitor is a .001 uF 25KVDC unit. 

I figure that a primary of about 10-15 turns and a 15KV 30mA neon sign
transformer should work......Will it? Does anyone know of a design that
uses the same secondary and capacitor as listed above?


Aaron Cake
London Ont.


The above is a gateway to my very own Web server. You must use this gateway
to access the server. 

Page me at http://wwp.mirabilis-dot-com/884261

"I hear something familiar on the wind tonight. A lonely woman's cry for
justice, from beyond death. And what justice is sweeter then that exacted
by those who have been wronged? Why law more perfect then that exercise by
an advocate who moves swiftly, and with resolve? Only you who've practiced
it know what I'm talking about. A man that studyith revenge keeps his own
wounds green."
         -Lucien LaCroix, Forever Knight

I charge $50.00 for all unsolicited commercial email sent to this address.