Re: plywood capacitor box

From: 	Roderick Maxwell[SMTP:tank-at-magnolia-dot-net]
Reply To: 	tank-at-magnolia-dot-net
Sent: 	Friday, July 11, 1997 9:38 PM
To: 	Tesla List
Subject: 	Re: plywood capacitor box

Tesla List wrote:
> From:   Michael Smith[SMTP:md.smith-at-usa-dot-net]
> Reply To:       md.smith-at-usa-dot-net
> Sent:   Friday, July 11, 1997 3:07 PM
> To:     tesla list
> Subject:        plywood capacitor box
> greetings all,
> Nice to see the list up and working again...The shakes are
> starting to go away now.
> I have a quick question. Can anyone recommend a very good and
> relatively inexpensive coating, like a two part epoxy paint or
> something that would be able to seal up the inside of a plywood
> box used to a capacitor case? I would like to avoid building a
> plastic box if I can.
> I would like to use several coats of polyurethane, then coat the
> inside with something to hold in the oil.
> Anyone have any experience along these lines?
> Michael Smith
> md.smith-at-usa-dot-net

 Use Evercoat two part epoxy. I bought mine from U.S. Plastics.

                       Frankensteins Helper