Re: Esthetically Pleasing Primaries

• To: tesla-at-pupman-dot-com
• Subject: Re: Esthetically Pleasing Primaries
• From: Malcolm Watts <MALCOLM-at-directorate.wnp.ac.nz>
• Date: Fri, 14 Feb 1997 07:50:11 +1200
• Subscriber: MALCOLM-at-directorate.wnp.ac.nz Thu Feb 13 22:01:43 1997

Guaranteed to make you green......

>Subscriber: maleske-at-worldchat-dot-com Mon Feb 10 22:10:57 1997
>Date: Mon, 10 Feb 1997 10:33:41 -0500
>From: Tim Maleske <maleske-at-worldchat-dot-com>
>To: Tesla List <tesla-at-pupman-dot-com>, Usa-Tesla List <usa-tesla-at-usa-dot-net>
>Subject: Esthetically Pleasing Primaries
>
>    [The following text is in the "ISO-8859-1" character set]
>    [Your display is set for the "US-ASCII" character set]
>    [Some characters may be displayed incorrectly]
>
>How do you guys keep your primaries looking so nice. All the pictures I
>have seen of primary's from copper tubing they are nice and flat and evenly
>spaced out. I tried running mine through hose for insulation, but this did
>not work well. (Boy is it tough to pull 40 feet of 1\4" copper through a
>5\16 I.D. tube !!!) What about the spiral type primaries? They all look so
>esthetically pleasing.

I checked out a plumbing store a few weeks ago and found some 
beautifully formed flat spirals of half inch pipe sitting on the 
shelf in platic bags. Will get some if I ever get the money.

Malcolm

• Prev: Re: Secondary coil form questions
• Next: Re: First big magnifier run
• Index(es):
  • Main
  • Thread