Re: Variac Wanted

From: 	gweaver[SMTP:gweaver-at-earthlink-dot-net]
Sent: 	Friday, December 26, 1997 9:16 PM
To: 	Tesla List
Subject: 	Re: Variac Wanted

Check the phone book yellow pages for Motor Repair shops.  They will have
the enamel coated wire you need.  I can get wire here at the local motor
repair shop for $4.00 a pound so I would think if they charge you more than
that your getting ripped off.

Gary Weaver

At 01:55 AM 12/27/97 -0600, you wrote:
>From: 	Tom[SMTP:tomg-at-avicom-dot-net]
>Reply To: 	tomg-at-avicom-dot-net
>Sent: 	Friday, December 26, 1997 12:46 PM
>To: 	Tesla List
>Subject: 	Variac Wanted
>Hello all and thank for the previous input.
>I am still trying to round up some parts for my coil.
>I am looking for a variac and #22 magnet wire.  The coil will eventually
>be powered by two 15kv 30ma neons, but I would like to use one to start
>with.  Is this a concern when buying a variac? I also cannot seem to
>find any wire.  Also some transformer oil sources would be cool to.