Re: Fiberglass ????? (fwd)

To: tesla-at-pupman-dot-com
Subject: Re: Fiberglass ????? (fwd)
From: Tesla List <mod1-at-pupman-dot-com>
Date: Fri, 19 Dec 1997 16:32:42 -0700 (MST)
Approved: mod1-at-pupman-dot-com



---------- Forwarded message ----------
Date: Fri, 19 Dec 1997 16:28:51 -0700
From: "D.C. Cox" <DR.RESONANCE-at-next-wave-dot-net>
To: Tesla List <tesla-at-pupman-dot-com>
Subject: Re: Fiberglass ????? (fwd)

to: Gary Weaver

G-10 glass laminate phenolic can be purchased thru any major plastics
distributor in almost any large city in the US.  Check the yellow pages at
your local library and give them a call.  Use either 1/2 or 5/8 thickness
for most rotors.

DR.RESONANCE-at-next-wave-dot-net


----------
> From: Tesla List <tesla-at-pupman-dot-com>
> To: tesla-at-pupman-dot-com
> Subject: Fiberglass ????? (fwd)
> Date: Friday, December 19, 1997 7:18 AM
> 
> 
> 
> ---------- Forwarded message ----------
> Date: Thu, 18 Dec 1997 20:06:18 -0800 (PST)
> From: gweaver <gweaver-at-earthlink-dot-net>
> To: Tesla-at-pupman-dot-com
> Subject: Fiberglass ?????
> 
> I bought a piece of 1/2" x 12" x 12" fiberglass for a rotor from Mc
Master
> Carr and when I received it today I found out its not really solid fiber
> glass. Its some type of phonolic board with a thin sheet if fiber glass
> glued to each side. Worthless and very dangerious of a rotor.
> 
> I just deleted 6180 emails today and remember someone mentioned something
> about G10 fiberglass makes a good rotor.  Where can I get some G10
> fiberglass for a rotor?
> 
> Gary Weaver