Re: Rotary spark gap

• To: tesla-at-pupman-dot-com
• Subject: Re: Rotary spark gap
• From: Dan Gowin <gowin-at-epic-1.nwscc.sea06.navy.mil>
• Date: Mon, 23 Sep 1996 10:50:22 -0500

Tesla List wrote:
> 
> >From SSNSanders-at-aol-dot-comSat Sep 21 12:11:52 1996
> Date: Fri, 20 Sep 1996 15:51:50 -0400
> From: SSNSanders-at-aol-dot-com
> To: tesla-at-pupman-dot-com
> Subject: Re: Rotary spark gap
> 
> In a message dated 96-09-20 02:45:14 EDT, you write:
> 
> << Rubber hose, using two hose clamps. >>
> Motor to rotor shaft?    Steve

Steve,
	Yes, I'm using a 6" peice of rubber hose filled
with RTV Silicone sealant. I'm hoping this will be enough
to isolate my motor from the HV transients.

D. Gowin

• Prev: Re: Capacitors
• Next: EMP cabinet
• Index(es):
  • Main
  • Thread