[Prev][Next][Index][Thread]
Re: HV PFC Capacitance ?
-
To: tesla-at-grendel.objinc-dot-com
-
Subject: Re: HV PFC Capacitance ?
-
From: "SROYS" <SROYS-at-radiology.ab.umd.edu>
-
Date: Mon, 11 Mar 1996 16:29:27 EDT
-
>Received: from comm1.ab.umd.edu (comm1.ab.umd.edu [134.192.1.5]) by uucp-1.csn-dot-net (8.6.12/8.6.12) with ESMTP id OAA24059 for <tesla-at-grendel.objinc-dot-com>; Mon, 11 Mar 1996 14:33:33 -0700
> Steven...
> Instead of cutting ect. why not try them in series. 10 units should
> give you 2.5uF -at- 24KV. 20 = 1.25uF -at- 48KV. etc...
These little puppies are about 24" wide x 8" deep x 18" high (with the
high voltage bushings) and weigh about 30 or 40 lb each. I only have 3
of them and I don't know if I'll find any more, but getting enough of them
in series to get me down into the .1 to .05uF range would really put a
dent in my floor space :-)
Steven Roys (sroys-at-radiology.ab.umd.edu)