[Prev][Next][Index][Thread]

Re: Copper foil



At 03:30 PM 1/23/96 +0700, you wrote:
>>From scotty-at-wesnet-dot-com Tue Jan 23 15:24 MST 1996
>>Received: from billboard.wesnet-dot-com (billboard.wesnet-dot-com [206.21.6.2]) by
uucp-1.csn-dot-net (8.6.12/8.6.12) with ESMTP id PAA01389 for
<tesla-at-grendel.objinc-dot-com>; Tue, 23 Jan 1996 15:16:05 -0700
>Date: Tue, 23 Jan 1996 17:35:20 -0500
>From: Scott Myers <scotty-at-wesnet-dot-com>
>Mime-Version: 1.0
>To: tesla-at-grendel.objinc-dot-com
>Subject: Re: Copper foil
>Content-Transfer-Encoding: 7bit
>
>tesla-at-grendel.objinc-dot-com wrote:
>> 
>> >From Esondrmn-at-aol-dot-com Tue Jan 23 13:33 MST 1996
>> From: Esondrmn-at-aol-dot-com
>> >Received: from emout06.mail.aol-dot-com (emout06.mail.aol-dot-com
[198.81.10.43]) by uucp-1.csn-dot-net (8.6.12/8.6.12) with ESMTP id KAA14595 for
<tesla-at-grendel.objinc.c
>> Date: Tue, 23 Jan 1996 12:53:33 -0500
>> To: tesla-at-grendel.objinc-dot-com
>> Subject: Copper foil
>> 
>> Scotty Meyers,
>> 
>>  I am looking for some rolls of copper foil (probably more
>> like copper flashing) 3" to 4" wide to solder my ground rods together and
>> then to use as the main RF ground connection for the coil.  Where did you get
>> this stuff?  

In the broadcast industry, we use copper grounding strap to tie the tower
base on an am tower to the ground radials. It is also used in phasor
cabinets ans indide transmitters as well. If you know a broadcast engineer
in your area, he may be able to point you in the direction of some of this
material left over from an installation. This material is between 4 and 12
inches wide and 14 to 20 gauge in thickness.

Jim Leonard