[Prev][Next][Index][Thread]
Rob's Capacitor
-
To: tesla-at-grendel.objinc-dot-com, Esondrmn-at-aol-dot-com, KLINEDA-at-UNIVSCVM.CSD.SCAROLINA.EDU, QUANTUM-at-UNIVSCVM.CSD.SCAROLINA.EDU, WMEYER-at-scientia.up.ac.za, bhaley-at-shore-dot-net, frerichs-at-zfe.siemens.de, froula-at-cig.mot-dot-com, haba-at-snakemail.hut.fi, scott-at-csustan.csustan.edu, stegmann-at-michelob.wustl.edu, wsbusr3-at-urc.tue.nl
-
Subject: Rob's Capacitor
-
From: coco-at-astroman-dot-com
-
Date: Tue, 30 Jan 1996 10:51:55 -0500
-
>Received: from borg.mindspring-dot-com (root-at-borg.mindspring-dot-com [204.180.128.14]) by uucp-1.csn-dot-net (8.6.12/8.6.12) with ESMTP id HAA24288 for <tesla-at-grendel.objinc-dot-com>; Tue, 30 Jan 1996 07:51:27 -0700
Thanks Chip!
As for the suggestion...I am not sure if I understand...are you saying to
extend tabs from each plate to outside to dielectric (every other plate to
one side)..and then connect buss wire out in the oil?.....this would allow
the closest arc distance to be the 1" depth from the edge of the plate to
the edge of the dielectric..will this be sufficient?
Thanks
Robert Del Bueno
coco-at-astroman-dot-com