[Prev][Next][Index][Thread]
Re: Center fed coil
-
To: tesla-at-GRENDEL.objinc-dot-com
-
Subject: Re: Center fed coil
-
From: Dan Kline <KLINEDA-at-UNIVSCVM.CSD.SCAROLINA.EDU>
-
Date: Wed, 17 Jan 96 19:42:12 EST
-
>Received: from UNIVSCVM.CSD.SCAROLINA.EDU (univscvm.csd.scarolina.edu [129.252.41.4]) by uucp-1.csn-dot-net (8.6.12/8.6.12) with SMTP id RAA12527 for <tesla-at-GRENDEL.OBJINC.COM>; Wed, 17 Jan 1996 17:47:05 -0700
On Wed, 17 Jan 1996 13:01:17 +0700 you said:
>Ed,
>
>Tesla Coil Secrets (laugh) has plans for almost exactly the coil you describe.
>Yes, the plans are way less than Ideal, but since this design was the third
>coil I ever built I thought I might say something if you're inclined to
>continue on with this 4" x 12" coil form...
Uhhh...4' x 12" actually. :)
>The gap was a rotary, 16' dia. with 12 electrodes, driven by a 2HP motor,
>no speed adjustment, only dwell adjustment.
Hahaha! 16" in diameter. (16-foot rotary: right. :)
>Dan <klineda-at-univscvm.csd.sc.edu>
Dan <klineda-at-univscvm.csd.sc.edu>