Re: Formless Secondary

To: tesla-at-grendel.objinc-dot-com
Subject: Re: Formless Secondary
From: DELCOKEVIN-at-aol-dot-com
Date: Tue, 20 Feb 1996 21:20:12 -0500
>Received: from emout07.mail.aol-dot-com (emout07.mx.aol-dot-com [198.81.11.22]) by uucp-1.csn-dot-net (8.6.12/8.6.12) with ESMTP id TAA06218 for <tesla-at-grendel.objinc-dot-com>; Tue, 20 Feb 1996 19:20:50 -0700

In a message dated 96-02-20 15:38:30 EST, you write:

>Well, I hope that wasn't too long winded for you, but I could have just said

>"yes, you're wasting your time." and left it at that, but you probably 
>wouldn't have appreciated that too much.  My point (as always): INCREASE THE

>PRIMARY Q and you will go much farther in increasing Qsys.  The best way to
>do 
>that is to wind a low frequency secondary coil (40-100KHz) that will require

>the largest possible primary inductor to tune it.  This slants the primary
>L/C 
>ratio up and increases primary Q dramatically.
>
>Boy, I sure say that a lot.
>
>Zap,

Thankyou very much for the explaination. I always prefer the longwinded
version! So much more informative.

                      Kevin M. Conkey