[Prev][Next][Index][Thread]
Re: Seagate Quench Gap
-
To: tesla-at-grendel.objinc-dot-com
-
Subject: Re: Seagate Quench Gap
-
From: ed-at-alumni.caltech.edu (Edward V. Phillips)
-
Date: Mon, 26 Feb 1996 17:26:56 -0800
-
>Received: from alumnae.caltech.edu (alumnae.caltech.edu [131.215.50.235]) by uucp-1.csn-dot-net (8.6.12/8.6.12) with ESMTP id SAA21571 for <tesla-at-grendel.objinc-dot-com>; Mon, 26 Feb 1996 18:28:01 -0700
Re:
Gaskets for quenched gaps. (-at-#%!-at-% carriage return!-at-#-at-#$)
Material used for automotive or aircraft engine head
gaskets (at least the non-metallic kind) should work fine,
I would think. You want to apply a lot of pressure to the
area where the gaskets are, and that should give a good seal.
I'm looking into the matter right now as I want to renovate
my old AMRAD gap, which has too low a voltage because the
3/64" fiber gaskets have compressed sometime in the last 75
years.
Ed Phillips