Re: Test results

Tesla List wrote:
> >From richard.quick-at-slug-dot-orgSat Aug 17 22:27:29 1996
> Date: Fri, 16 Aug 1996 03:34:00 GMT
> From: Richard Quick <richard.quick-at-slug-dot-org>
> To: tesla-at-poodle.pupman-dot-com
> Subject: Re: Test results


> Charlie, all:
> I have just been a-messing around. Just a few days ago Richard
> Hull was discussing electrostatics and Tesla coils. He remarked
> that actual experiments provide support to the idea that Tesla
> coil outputs have many DC qualities. This one was all but too
> easy to set up and run:
> I took a simple 6 inch coil system with a foil wrapped funnel
> taped to the side of the toroid. The funnel had the "pointed" end
> facing away, and the tip of the funnel was rounded or "blunted"
> with a small rubber ball under the foil wrap. The coil was then
> tuned as a transmitter (no breakout or spark issues from the
> discharger).
> About twenty inches from the rounded "point" of the conical
> projection, I suspended a spherical terminal 4 inches in diameter
> from nylon monofiliment fishing line. A lead wire was taken from
> the sphere and routed on insulators towards my system ground. All
> measurements/distances were approximate, as I was changing things
> constantly, but this should give an idea of the basic arrange-
> ment.
> The coil was fired at very low power, >1kva, and the suspended
> sphere terminal distance to the toroid was adjusted until blue
> corona just illuminated the space between the two. By changing
> the distance between the lead wire from the elevated spherical
> terminal and my system ground, thereby drawing sparks to ground,
> I was able to verify the sphere was being charged by the coil.
> My next step was to build an insulated counterpoise above the
> ground by stacking some large toroids on a plastic milk crate.
> I connected the counterpoise (a high voltage capacitance of small
> value) to the lead wire from the sphere and discharged the
> counterpoise to ground periodically with a shunt on an insulated
> handle.
> For all appearances, this system was acting as if the spherical
> "pickup" terminal and the insulated counterpoise above the ground
> were being charged with DC from the coil. The more capacitance
> added to the counterpoise, the bigger and brighter the sparks I
> was able to draw to the system ground. The longer I allowed the
> counterpoise to charge, the bigger and brighter the sparks I was
> able to draw to the ground.
> There is a lot of additional experiments I have not yet
> undertaken with this rather simple apparatus. I will look into
> this more in the coming days.
> Richard Quick
> ... If all else fails... Throw another megavolt across it!
> ___ Blue Wave/QWK v2.12


If you want to see just how this charging works, just hook a nice fat 
.1UFd -30KV cap between ground and those stacked toroids on the milk 

The impedance of the system is low enough to charge a big ole healthy cap 
and when shorted... BOOM!  So this is not some high impedance whimpy DC 
charging mechanism, but can supply power if needed.  This is also too 
easy not to try.  I have been running lots of Electrostatic machines of 
of the collectors, too.  All from a coil of 15-20 watts.

Good work, nice to here someone else monkeyed around with this a bit.  I 
am about to undertake a series of quantitative experiments in this 
matter.  More as I figure it out.

Richard Hull, TCBOR