Re: potential sync. motor

["Metlicka Marc" <mystuffs-at-orwell-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)]

luc,


Tesla list wrote:

> Original poster: "Lau, Gary" <Gary.Lau-at-compaq-dot-com>
>
> Hi Marc:
>
> I hope you have some other use for this motor.  If the speed is 11000 RPM,
> there's no way this can be converted to the required 1800 or 3600 RPMs
> necessary for a sync RSG.

no, if you think about it, the blower is belt driven from the 3.5" disk at 3-1
ratio. i guess things must be explained thoroughly in all cases? sorry

>
>
> Regards, Gary Lau
> Waltham, MA USA
>