A perfect secondary!!!

["Kelly & Phillipa Williams" <kellyw-at-ihug.co.nz> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)]

I have just finished my first attempt at a secondary coil. It used an huge
engineer's lathe at
a large timber mill where my Dad works. I set it fairly slow and then wound
the wire on holding
it at an angle so there were no gaps and tensioned the wire. The final thing
on PVC with no varnish
looks awesome, and there aren't any faults that I can see. It only has 754
turns though, I wanted 950ish
turns. Is there any "optimum number" of turns? I plan on a primary with
around 19 turns and a 10. uF capacitor.


Thanks,

Alan