RE: CD's

To: tesla-at-pupman-dot-com
Subject: RE: CD's
From: "Mycroft" <mycroft-at-access1-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Date: Wed, 24 May 2000 07:35:09 -0600
Approved: twftesla-at-uswest-dot-net
Delivered-To: fixup-tesla-at-pupman-dot-com-at-fixme

Contrary to popular belief - the Al layer is the upper layer just under
the logo on a CD. That's why its better to leave them lying "face down"
than up.
To keep this on tesla... I've used my coil with a spherical topload to
blow this Al layer right off. Kinda cool looking :)


Michael Baumann
Coiler, Homebrewer, Nerd...
mycroft2-at-earthlink-dot-net
http://home.earthlink-dot-net/~mycroft2 

> -----Original Message-----
> From: Tesla List [mailto:tesla-at-pupman-dot-com]
> Sent: Tuesday, May 23, 2000 7:12 PM
> To: tesla-at-pupman-dot-com
> Subject: Re: CD's
> 
> 
> Original Poster: "Christopher Boden" <chrisboden-at-hotmail-dot-com> 
> 
> >I found a perfect way to get writ of the metal on a CD: just put some 
> >sticky
> >tape on it and tear it off. With a little luck you will take the 
> metal off
> >also! Works great!
> >
> >Hope this helps more...
> >
> >Ruud de Graaf
> 
> How can this possibly work? I can see how you could get the 
> screen-printed 
> logo off (though Varvo V-120 would do this much better), but how can you 
> take the Al layer out of a CD with adhesive tape?
> Have you succeded in splitting one in half?
> 
> Christopher A. Boden Geek#1
> President / Founder
> The Geek Group
> www.geekgroup-dot-org
> Because the Geek shall inherit the Earth!
> 
> ________________________________________________________________________
> Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail-dot-com
> 
> 
>