3-phase filter hookup

To: tesla-at-pupman-dot-com
Subject: 3-phase filter hookup
From: "Barton B. Anderson" <tesla123-at-pacbell-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
Date: Mon, 15 May 2000 22:31:35 -0600
Approved: twftesla-at-uswest-dot-net
Delivered-To: fixup-tesla-at-pupman-dot-com-at-fixme

Hey guys, 

Hopefully a simple question here. I've got my coil setup now in this new
house and everythings ready to fire up (when I do it will be the first time
since last July in MN). Anyway, I installed a 30A line filter (3-phase) in
the control mod replacing the one I blew a 1/2" hole in on my last run in
MN (went out with a bang!). I would like to make this a bit more robust if
possible. So, I think I could bus L1, L2, L3 together hooking up one hot to
the bus and the other hot to N (neutral). This is a 220V system (btw) with
2 hots and a ground. 

So,will paralleling the original filtering per leg increase current
carrying capabilty? I think it will but it may also change the filtering
frequency. Thought I'd throw this past anyone with a bit of knowledge on
the 3-phase filters. 

Thanks, 
Bart