[Prev][Next][Index][Thread]
Re: Unwanted LC
-
To: tesla-at-pupman-dot-com
-
Subject: Re: Unwanted LC
-
From: Terry Fritz <twftesla-at-uswest-dot-net>
-
Date: Sun, 14 May 2000 19:46:19 -0600
-
Approved: twftesla-at-uswest-dot-net
-
Delivered-To: fixup-tesla-at-pupman-dot-com-at-fixme
-
In-Reply-To: <20000514.201858.-78565.5.kunk77-at-juno-dot-com>
Hi Dan,
You may want to check out the following...
http://users.better-dot-org/tfritz/site/papers/primarycircuits/pricir.html
http://users.better-dot-org/tfritz/site/papers/spark1/sparkgap.html
http://users.better-dot-org/tfritz/site/papers/rcfilter/rcfilter.html
http://users.better-dot-org/tfritz/site/papers/rlcfilter/rlcfilter.html
http://www.peakpeak-dot-com/~terryf/tesla/misc/Filter.jpg
http://users.better-dot-org/tfritz/NSTFilt.jpg
I would NOT consider the use of inductors. Resistors and capacitors
provide excellent noise filtering. The last URL above is my favorite for a
15kV/60mA neon system. The parts are from Digi-Key. This, and putting a
fast fuse on the NST input, should fully protect the NST against everything.
Cheers,
Terry
At 08:16 PM 05/14/2000 -0500, you wrote:
>Greetings Tesla Fans!
>
>I have gotten differing advive on RF protection from what I call two
>reliable sources. One says to use RF chokes and RF bypass capacitors. The
>other says use either/or but not both at the same time. The reasoning
>behind the second advice is that the L from the chokes and C from the
>caps can set-up unwanted, destructive oscillations in the tank. Who is
>right?
>
>Right now my banked NSTs are only being protected by ~30 turns of 20-22
>awg magnet wire wound around a ~1.5 plastic tube. Does this sound
>sufficient? I have never heard any "real" advice on RF chokes. Most of
>what I heard said that winding them is really a shot in the dark, and
>just about any inductance will work.
>
>Thanks for input,
>
>Dan
>________________________________________________________________
>YOU'RE PAYING TOO MUCH FOR THE INTERNET!
>Juno now offers FREE Internet Access!
>Try it today - there's no risk! For your FREE software, visit:
>http://dl.www.juno-dot-com/get/tagj.
>