MMC setup opinions

• To: tesla-at-pupman-dot-com
• Subject: MMC setup opinions
• From: "teslacoilfreak1" <teslacoilfreak1-at-mediaone-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
• Date: Wed, 10 May 2000 18:26:52 -0600
• Approved: twftesla-at-uswest-dot-net
• Delivered-To: fixup-tesla-at-pupman-dot-com-at-fixme

Hello,

I wanted to post my intended MMC setup to see what the list thinks.

I am using Panasonic ECWH(V) 1.6kV .056uF caps.(purchased from Terry) my
planned max input is 12kV rms which gives me a peak voltage of
16,970.4V(12,000 x 1.4142 = 16,970.4??) so I am planning on using 12
caps/string which gives me a voltage rating of 19.2kV.This should be o.k.
right? Now what I realy need confirmed is the capacitance of each string.
Here is how I figured it...(1/.056=17.857 x 12 = 214.5) 1/214.5 =.00466uF
????
Is this correct? now if I am going to use five strings and assuming the
above is correct that should give me a todal capacitance would be around
.0233uF right?

well thats all,thanks for any help

Kevin Dalpe

• Prev: Current list status
• Next: Re: Mylar Interlayer Insulation
• Index(es):
  • Main
  • Thread