[Prev][Next][Index][Thread]
Re: calculating bps for sync rsg..Thanks!
-
To: tesla@pupman.com
-
Subject: Re: calculating bps for sync rsg..Thanks!
-
From: FutureT@aol.com (by way of Terry Fritz <twftesla@uswest.net>)
-
Date: Sat, 04 Mar 2000 11:58:53 -0700
-
Approved: twftesla@uswest.net
-
Delivered-To: fixup-tesla@pupman.com@fixme
In a message dated 00-03-04 08:15:34 EST, you write:
<< Original Poster: "Jon Lagler" <rockcrawl@netzero.net>
> Thanks everyone for the responses! I am using a standard ac motor which I
> have modified by cutting/grinding two flats on the armature. I guess this
> brings the RPM up to 1800, and so I have 120 breaks per second.
> Thanks,
> Jon >>
Jon, the 1800 rpm motor should have 4 flats, and a 3600 rpm motor
should have 2 flats. Did you check to make sure the motor is really
locked up? I suppose it might be able to lock with just 2 flats, but
it probably doen'st lock as easily or strongly. I don't know, I've never
done it that way and put 2 flats on a 1800 rpm motor.
Cheers,
John Freau