RE: calculating bps for sync rsg

• To: tesla@pupman.com
• Subject: RE: calculating bps for sync rsg
• From: "Basura, Brian" <brian.basura@unistudios.com> (by way of Terry Fritz <twftesla@uswest.net>)
• Date: Fri, 03 Mar 2000 10:58:12 -0700
• Approved: twftesla@uswest.net
• Delivered-To: fixup-tesla@pupman.com@fixme

Jon,

Multiply the RPM by the electrodes (1725*4)
This gives you 6900 breaks per minute
Now divide by 60 to get breaks per second (6900/60)
This gives you 115 BPS

BTW-This is an asynchronous rotary (since it is not a multiple of the 60hz
line frequency)

Hope this helps,
Brian Basura 

-----Original Message-----
From: Tesla List [mailto:tesla@pupman.com]
Sent: Thursday, March 02, 2000 3:17 AM
To: tesla@pupman.com
Subject: calculating bps for sync rsg


Original Poster: "Jon Lagler" <rockcrawl@netzero.net> 

Hello,
 This may be a dumb question, but please bear with me, I'm kinda new at
this.
How do I calculate the break rate of my synchronous rotary gap? My rotor has
4
contacts. it is a 1/2 hp motor, 1725 rpm(I think), 60hz. Whatever it is, it
seems to work well.
 
 
Thanks in advance,
 Jon

• Prev: Re: calculating bps for sync rsg
• Next: Re: calculating bps for sync rsg
• Index(es):
  • Main
  • Thread