[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: ignition coil for high voltage source
- To: tesla@pupman.com
- Subject: Re: ignition coil for high voltage source
- From: Fucian@aol.com (by way of Terry Fritz <twftesla@uswest.net>)
- Date: Fri, 09 Jun 2000 03:08:13 -0600
- Approved: twftesla@uswest.net
- Delivered-To: fixup-tesla@pupman.com@fixme
Ive got a question about the ignition coil stuff.I was getting very big arcs
from a small one using an unkown power transformer and a relay and a
capacitor.Well I pushed the cap too far and it retired:(anyway,if the cap
acts as a resister,is it possible to substitute it with a light bulb or
somthing like that?
matt