Re: safety gap ? ?

• To: tesla@pupman.com
• Subject: Re: safety gap ? ?
• From: "Dr. Resonance" <Dr.Resonance@next-wave.net> (by way of Terry Fritz <twftesla@uswest.net>)
• Date: Wed, 23 Feb 2000 19:58:13 -0700
• Approved: twftesla@uswest.net
• Delivered-To: fixup-tesla@pupman.com@fixme

Yes, very bad.  You need a gap to ground off each bushing for effective
protection.

Dr. Resonance


-----Original Message-----
From: Tesla List <tesla@pupman.com>
To: tesla@pupman.com <tesla@pupman.com>
Date: Wednesday, February 23, 2000 3:24 PM
Subject: safety gap ? ?


>Original Poster: LEST2001@aol.com
>
>    I've incorporated a safety gap in my primary circuit, but I don't have
it
>ark to ground, I have it ark between the two outputs of my NST. Is this bad
>not having it ark to ground? It's working just fine, so I'm wondering if I
>should change it.
>Leslie
>
>
>

• Prev: Re: G10 (and GPO3)
• Next: Variac Knob Wanted
• Index(es):
  • Main
  • Thread