[Prev][Next][Index][Thread]
Re: breakout problems
-
To: tesla@pupman.com
-
Subject: Re: breakout problems
-
From: "Ryan Ries" <spud@wf.net> (by way of Terry Fritz <twftesla@uswest.net>)
-
Date: Sat, 12 Feb 2000 13:25:20 -0700
-
Approved: twftesla@uswest.net
-
Delivered-To: fixup-tesla@pupman.com@fixme
Well, the most obvious would be to use a smaller discharge terminal, or
toroid. Larger toroids force the system to build up a higher voltage
before breaking down. Alternately, of course, you could always just pump
more power into it. :-)
-- Ryan
----------
> From: Tesla List <tesla@pupman.com>
> To: tesla@pupman.com
> Subject: breakout problems
> Date: Saturday, February 12, 2000 10:30 AM
>
> Original Poster: "Joe Thuss" <jbthuss@execulink.com>
>
> I have a small coil (600 W) and can't seem to get it to breakout without
using
> a breakout bump. Any ideas would be helpful.
> Thanks
>
>
>