Secondary question!

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Michael Petersson by way of Terry Fritz <twftesla-at-uswest-dot-net>" <mike.petersson-at-swipnet.se>

 
 
HI all,
I have looked for a coil to use as a model and I have found some that I'll
think would be just perfect.
But many of them uses AWG 28 magnet wire, and the only AWG I can get in that
"size" is AWG 28 and 29. I have relized that I will use more power about 630W
and I want to build it as good as I can. The two secondaries I will chose from
will probably be:
 
1) Secondary 4.5"x20"
AWG 29
Inductance 61mH
Turns ~1630
 
would the wire hold?
 
2) Secondary 4.5"x23"
AWG 27
Inductance 45mH
Turns ~1500
 
Which one would you experienced coilers choose? Or If you got other suggestions
please tell me.
(Forgive my ignorance)
 
Thank You!
 
Michael / Sweden
 
-------------------------------------------------------------------------
BTW thank you all who responded on my last post