Re: Protection Filter Array

["Tesla list" <tesla-at-xxxxxxxxxx>]

Original poster: "BunnyKiller" <bigfoo39-at-telocity-dot-com> 

Tesla list wrote:

> Original poster: "Ted Rosenberg" <Ted.Rosenberg-at-radioshack-dot-com>
>
> Hello everyone <and Terry F>:
>
> It appears I might be successful in my quest to set up three 15KV/60mA NSTs
> in parallel for my 2.7KW coil for next years haunted house. I just won't go
> the PT/pig/220 route. I'll just max out a 30A breaker instead.
>

snipperzzz...

Hi Ted

a setup of protection devices may be intuitive but heres my story ...

i ran 4 15KV 30mA units for a total of 15KV 120mA on a coil system with some
decient caps and the SD spark gap for many hours for a haunted house system,
the only problem encountered was the needing to clean the gaps of corrosion
after about 8 hours of run time ( 15Secs on 60 Secs off) (( 2 hours of
continious run time)) either i had a good tune or i was spared the demise of
the tela gods of wrath  :)

Scot D