[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re:Re: not conducting secondary to ground.

To: tesla@pupman.com
Subject: Re:Re: not conducting secondary to ground.
From: "Tesla list" <tesla@pupman.com>
Date: Wed, 20 Dec 2000 07:14:42 -0700
Resent-Date: Wed, 20 Dec 2000 07:16:54 -0700
Resent-From: tesla@pupman.com
Resent-Message-ID: <E5ThoD.A.A4E.S9LQ6@poodle>
Resent-Sender: tesla-request@pupman.com

Original poster: "Albert Hassick by way of Terry Fritz <twftesla@uswest.net>" <uncadoc@juno.com>

Hi.  Sounds like a OUDIN coil setup to me.  Secondary bottom tapped to
primary with no earth ground.   Can be quite dangerous with a small to
medium high voltage supply.  A larger power supply in the tank is
probably deadly to the touch.    AL.
________________________________________________________________
GET INTERNET ACCESS FROM JUNO!
Juno offers FREE or PREMIUM Internet access for less!
Join Juno today!  For your FREE software, visit:
http://dl.www.juno.com/get/tagj.

Prev by Date: Re: Primary question
Next by Date: Re: EMI filter hookup
Prev by thread: Re: not conducting secondary to ground.
Next by thread: John Freau's SRSG Dwell Controller
Index(es):
- Date
- Thread