Re: Schematic Software

["Tesla list" <tesla@pupman.com>]

Original poster: Terry Fritz <twftesla@uswest.net>

Hi,

Version 8 is the "standard" simulator we use for coiling.  The versions 8
and 9.1 are NOT file compatable but there is a super hard to find
conversion program around somewhere.  Version 8 can be found at:

http://hot-streamer.com/TeslaCoils/Programs/Programs.htm
http://users.better.org/tfritz/site/programs/80dlabe.exe
ftp://ftp.orcad.com/dwn_file/Pspice/Eval_Versions/

Cheers,

	Terry

At 11:47 PM 12/8/2000 -0600, you wrote:
>If you can obtain it, get the "Student Version" of PSPICE 8, available on the
>internet if you do a good bit of searching.  I personally cannot stand 
>PSPICE 9.x
>because the interface is more ungainly.  But if you desire you can try
that out
>too, from www.orcad.com
>
>Or just ftp to
>ftp://ftp.orcad.com/dwn_file/Pspice/
>
>This program will draw and simulate most of your standard analog/digital
>circuits; the diagrams it produces look reasonable in general.
>
>If you have a unix system then of course  xcircuit  is the program of choice.
>
>Tesla list wrote:
>
>> Original poster: "Steve & Jackie Young" <youngs@konnections.com>
>>
>> List,
>>
>> I am looking for recommendations for an inexpensive user-friendly program to
>> draw electronic circuit diagrams.  I have Turbo-Cad, but that is an
overkill.
>> "Paint" is an underkill.  Isn't there something in between?  What do you
>> recommend?
>>
>> --Steve
>
>--
>(.)
>/|\ Sputnik
>
>