Re: Winding Primaries (fwd)

["Tesla list" <tesla@xxxxxxxxxx>]

Original poster: Tesla List Moderator <mod1@poodle.pupman.com>



---------- Forwarded message ----------
Date: Sat, 02 Dec 2000 19:23:20 -0600
From: Barton B. Anderson <tesla123@pacbell.net>
To: Tesla list <tesla@pupman.com>
Subject: Re: Winding Primaries (fwd)

Hi Siman, All,

Here's a photo of my primary. I've been raving zip ties for a quilte a while because it's so
simple and quick and turns at pretty good. Drill through holes through runners, then simply pull
ties up through hole - over primary - and back down same hole locking on the bottom. Here's the
photo:

 http://www.classictesla.com/photos/gizmos/12129801.html

Bart

Tesla list wrote:

> Original poster: Tesla List Moderator <mod1@poodle.pupman.com>
>
> ---------- Forwarded message ----------
> Date: Wed, 6 Dec 2000 12:55:35 -0500
> From: sundog <sundog@timeship.net>
> To: 'Tesla list' <tesla@pupman.com>
> Subject: RE: Winding Primaries (fwd)
>
> Hi Simon, All,
>
>   I know some on the list will cringe, but I used zipties and 1/4"
> polycarbonate for my primary.  A pic of it can be seen at
>
> http://sundog.timeship.net/images/big-primary.JPG
>

snip