Re: winding the primary?

["Gregory R. Hunter" <ghunter-at-accucomm-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)]

Mike,

It isn't that hard.  Check out my world's simplest flat spiral primaries at:

www.angelfire-dot-com/ga3/tesla

I've got a couple of them on there.  You'll just have to surf around a bit
to find both of them.  I think the web pages are self-explanatory, but
contact me off-list if you need more guidance.

Best Regards,

Greg

At 10:36 PM 08/30/2000 -0600, you wrote:
>Original poster: "homie" <ff-at-hotmail-dot-com> 
>
>hi all,
>
>i am winding my primary and it is really starting to hack me off! i am using
>1/4in od copper tube. it is a pancake coil that is 9 turns and it wont stay
>in place does anyknow "the KEY" to getting a perfet primary? i have seen
>some real nice ones and i just cant see how. some say just work
>slowly...well that dount seem to work i haev spent more time on the primary
>then i spent winding the secondary.
>
>also i am looking for a varic ya i have seen them for sale but ya know $$ is
>always a issue and they are likr 160 dollers does that seem right? does
>anyone know how i can optian one for cheaper or is this as cheap as they
>come?
>
>thanks alot,
>
>MIKE
>
>
>
>
>