RE: disaster (i think)?

["David Dean" <deano-at-corridor-dot-net> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)]

Hi Marc,

As long as there are no crossed wires, or loose wires sticking out that
might get crossed, I wouldn't worry about it.

> -----Original Message-----
> From: Tesla list [mailto:tesla-at-pupman-dot-com]
> Sent: Tuesday, August 29, 2000 9:00 AM
> To: tesla-at-pupman-dot-com
> Subject: disaster (i think)?
>
>
> Original poster: "Metlicka Marc" <mystuffs-at-orwell-dot-net>
>
> all,
> today i put a coat of insulating varnish on the 3000 turn coil, what i
> saw sickened me. i thought i was so careful to get the wire tight
> together but after the varnish at least a hundred? gaps showed up in the
> windings. not really the width of a wire but there there.
> there is no crossed wires but i'm not sure if the gaps will kill it or
> not? it goes about two inches real tight and then a gap, then maybe a
> half inch, another gap and so on.
> will covering it in urethane help, or can i expect it to burn?
> any help will be grateful,  sad marc.
>
>
>