RE: my first coil...

["Ted Rosenberg" <Ted.Rosenberg-at-radioshack-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)]

Eric: You might get a similar reply from others. If you use Wintesla to
assist with the numbers, typically you put in the KV and mA of your NST
first which then dictates a bunch of stuff like a chain. So what I'm
suggesting is plan your NST purchase first.

Ted Rosenberg
Geek Group Member #55
www.thegeekgroup-dot-org
Because the Geek shall inherit the Earth!
------------------------------------------

Subject: my first coil...
Original poster: EMG8714-at-aol-dot-com 

Hi everyone....

I have finally got together a lists of specifications on what I hope to be
my 
fist coil.
Like i said before, this is my first, and I know that not all of the specs. 
are going to be perfect the first time. What I was hoping, was that if one
of 
you could check them out, and tell me if they look reasonable. For this 
purpose, i have made a page on the web containing most of the material about

my coil which you can find at:

http://hometown.aol-dot-com/emg8714/page2.html

Note: there are listed on that site, only certain aspects of the coil, if
you 
would like to know more, such as caps or spark gap, or if you are feeling 
very gracious, and would like to help me on some of these aspects, please 
fell free to send me an e-mail.

        ---eric gendron---