Re: my first coil...

[Terry Fritz <twftesla-at-uswest-dot-net>]

Hi Eric,

	Sounds pretty good,  Your secondary is a little long and thin but probably
not too bad.  Be sure your primary coil and cap will tune the secondary
coil and top load.  One of the many programs may help to be sure you don't
get stuck there.  26 wire may be a bit thin but if it will tune, it will
work.  Save yourself a "first coiler headache" and use safety gaps across
the NST too :-))

Cheers,

	Terry


At 05:30 PM 8/27/00 -0400, you wrote:
>Hi everyone....
>
>I have finally got together a lists of specifications on what I hope to be my 
>fist coil.
>Like i said before, this is my first, and I know that not all of the specs. 
>are going to be perfect the first time. What I was hoping, was that if one of 
>you could check them out, and tell me if they look reasonable. For this 
>purpose, i have made a page on the web containing most of the material about 
>my coil which you can find at:
>
>http://hometown.aol-dot-com/emg8714/page2.html
>
>Note: there are listed on that site, only certain aspects of the coil, if you 
>would like to know more, such as caps or spark gap, or if you are feeling 
>very gracious, and would like to help me on some of these aspects, please 
>fell free to send me an e-mail.
>
>        ---eric gendron---
>