Re: avalon condition

["tesla" <tesla-at-cyberverse-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)]

I have an idea for a rotary gap that I haven't seen discussed before. I
picture it as two disks with electrodes facing each other the proper
distance. Both are stationary. In between the disks is a motor-driven
insulator disk, with holes punched out so when the rotary disk spins, it
uncovers all electrodes at the same time. Number of electrodes is of course,
up to the design.

Seems that this idea, if properly made, would quench as good as, or better
than anything i've heard of. The only possible problem I see is erosion of
the rotary disk.

Gene Lambert