NE Ohio Teslafest in Planning

["harvey norris" <harvich-at-yahoo-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)]

Hi all: I dont think I noticed any teslathons in Ohio
lately, but it seems like its time for one before the
weather becomes like Ohio again. I dont have a tesla
coil to demonstrate but Metlicka Marc
<mystuffs-at-orwell-dot-net>  expressed an interest in
attending. I need to get a gauge on how many people
would be interested in attending with coils, so write 
off list if you have an interest. Last year at the Mid
Ohio Teslafest Dr Rezsortorski did the best
demonstration of high frequency in many forms that I
have ever seen, so there are some avante garde coilers
in the area. For my part I can give many
demonstrations of induced high frequency effects on
high induction coils. I plan to set up a field plate
and show how 4 different inductors have 4 different
frequencies induced from that same electric field
plate. I now have 4 scopes and wish to do this demo to
show what my MWO theory is all about, and that the
other scopes all show the same phenomenon. I also
invite any guests to bring their own scopes and
sensing coils to show how each coil rings in its own
frequency in these fields. Extra probe leads are
needed.

Also a demonstration of the 360 hz 6 phase alternator
system to achieve resonant rise of voltage of a .47
Henry induction coil system is planned. This is
pictured at
http://msnhomepages.talkcity-dot-com/LaGrangeLn/teslafy/prototype.html
 This coil system, (not yet placed on webpages)has a Q
of 4.8 at 60 hz because it has only 39 ohms on 15,000
ft of 14 gauge wire! The q at 360 hz is predicted
around 28.  This means that the 25 /30 volt output of
the alternators can be stepped up to about 700 volts
without the use of a transformer! Indeed a transformer
application at 360 hz seems problematic, but 3
different 3 phase tranformers are also available to
anyone crazy enough to try running a 360 hz tesla coil
set up. But dont blame me if something fries!! But you
cant fry any of the input components since the stator
windings are only 1 ohm!

The unusual thing about using resonant rise of voltage
as an input is that it is load dependent. I also plan
to show how placing the dead short of an
electrolysisor across a 180 phased series resonance at
the midpoints of those resonances, in turn reduces
that application of voltage automatically down to the
voltage near the thermoneutral electrolysis voltage.
This is then predicted to turn the circuit into a
parallel resonant condition where the amperage through
the electrolysisor then becomes 28 times greater than
the amperage input from the alternator phase, by
virtue of the resonant rise of amperage available in
parallel resonance.

 This is planned for  a Saturday weekend in September,
but any day is open. Most working folks like
Saturdays.
Sincere in the art/ HDN

=====
Binary Resonant Systemhttp://www.insidetheweb-dot-com/mbs.cgi/mb124201

__________________________________________________
Do You Yahoo!?
Yahoo! Mail ­ Free email you can access from anywhere!
http://mail.yahoo-dot-com/