RE: Ion Generator

["Dale Hall" <Dale.Hall-at-trw-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)]

Hi Fucian,
RE: your question:
Are you designing your own ?
Or are you asking if you can boost an existing one ? 
  short ans: not likely but depends on design margin

some Flyback design considerations:
Choose a core size for the power (wattage) and switching frequency desired. 
   for example: 4'x6" ferrite core is used in 35kHz 200W 20kV spaceflight TWTA
   HV designs use multiple HV isolated secondaries on a core, each
rectified and wired in series
Choose a switch that can charge the core to the energy level required per cycle
Capacitor charge task can be optimized by design of the feedback circuit
etc.
Regards, Dale

-----Original Message-----
From: Tesla list [mailto:tesla-at-pupman-dot-com]
Sent: Wednesday, August 02, 2000 9:56 PM
To: tesla-at-pupman-dot-com
Subject: Re: Ion Generator

Original poster: Fucian-at-aol-dot-com 

Hi all, i want to ask those about getting max current out of a large 
flyback.How are all yall gettingyour max current?

matt