Re: SRSG motor power

["Gomez ADDams" <gomez-at-netherworld-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)]

on that fateful day 8/1/00 12:05 PM, Tesla list uttered:

> The required phase angle will change considerably between low
> and high power operation.  The final adjustment will need to be
> made at full power.
 
 I am unclear on why this could be so.  However, if true, then a lot more
engineering will need to take place on my gap, since no one will be
able to safely get within twenty or thirty feet of the coil base when it is
running at full power.

 And if such engineering needs to take place, that's a shame, since I have
already had the base plate for the gap built- this could mean a loss of
some six months and some money.  Given that I'm already probably a year from
completion, this is disappointing to say the least.

 Perhaps I can jerry-rig a pushrod affair without having to resort to remote
controls, or perhaps I can find a small phase angle adjuster that won't take
up too much shaft length, and will still take the HP.  I think Small Parts
Inc. has them. (just checked- they do, but they are manual adjustment and
like everything else from SPI, ridiculously overpriced.  A nice convenience
feature if you don't mind spending _$239_!)

- Gomez (Bill Lemieux)

........................................................................
Fight for your right to privacy & freedom on the internet!  Use strong
encryption.  Encourage others to do the same.  Strong encryption is your
key to electronic privacy.  I have PGP-fone available for secure voice.
PGP fingerprint: 1CC2 ACFA 166B 92C7 FC4E  D0F5 006A 0EC1 8BD3 A988