[Prev][Next][Index][Thread]
Re: A figure of merit
Hi Ken
I find your proposition interesting, I'm always interested by solid state
coil they are a bit to technical for my knowledge but I dream to built one
maybe with a pair of IGBT.
Maybe I'm wrong but on your scale you only take in count the volt not the
ampere all the scale I saw are length/watt .If you input 160V at 10mA or
160V at 10A I think the result wouldn't be the same.
Correct me if I'm wrong please.
Luc Benard(Montreal)
Tesla List wrote:
> Original Poster: "Kennan C Herrick" <kcha1@juno.com>
>
> A while back Gary Johnson asked for reports on solid-state spark length;
> and I responded with a proposal for a figure of merit or "quality"
> measure for Tesla coils: spark length to a grounded point per primary
> volt--for all builders, solid state and "spark". I proposed millimeters
> per volt just to make the number less depressing (25.4 mm are in each and
> every inch!).
>
> But there's been a silence. So I repeat it. How about it, everyone?
> Any interest?
>
> I put up 3.8 mm/V: ~24" or 610 mm with 160 V on my solid-state primary.
>
> Ken Herrick
> ________________________________________________________________
> YOU'RE PAYING TOO MUCH FOR THE INTERNET!
> Juno now offers FREE Internet Access!
> Try it today - there's no risk! For your FREE software, visit:
> http://dl.www.juno.com/get/tagj.