Re: Transformers - Testing, Comparing, etc.

• To: tesla@pupman.com
• Subject: Re: Transformers - Testing, Comparing, etc.
• From: "Paul Mathus" <pmathus@learningco.com> (by way of Terry Fritz <twftesla@uswest.net>)
• Date: Sat, 15 Apr 2000 17:25:38 -0600
• Approved: twftesla@uswest.net
• Delivered-To: fixup-tesla@pupman.com@fixme

     Andy,
     
     I built this HV-safe ammeter from Terry's specs after converting my 
     Radio Shack multimeter into a smoke machine trying to measure my NST 
     output.  Terry's design is easy, looks professional, and works great.
     
     http://www.peakpeak.com/~terryf/tesla/misc/meter.jpg
     
     paul


______________________________ Reply Separator
_________________________________
     
     <snip>
Secondly - I have several NSTs that I have depotted, and modified.  One is 
15,000/60, the two others are 15,000/30.  I believe that if I put these in 
parallel, it would be a good supply.  My questions regarding these are as 
follows -
1. How can I test the current output of them after modification?  I have 
found that connecting a meter across the outputs, or on one side of a 
spark-gap does not work.
     <snip>
     
-Andy Cleary
     
     

• Prev: Improved Scott gap
• Next: Re: Coil ideas for experiments
• Index(es):
  • Main
  • Thread