Re: Question about DC resonant charging

• To: tesla@pupman.com
• Subject: Re: Question about DC resonant charging
• From: "Finn Hammer" <f-hammer@post5.tele.dk> (by way of Terry Fritz <twftesla@uswest.net>)
• Date: Fri, 14 Apr 2000 20:58:05 -0600
• Approved: twftesla@uswest.net
• Delivered-To: fixup-tesla@pupman.com@fixme

Tesla List wrote:
> 
> Original Poster: "Marco Denicolai" <Marco.Denicolai@tellabs.fi>

> >Original Poster: "David Dean" <deano@corridor.net>
> >
> >Questions to you who use DC resonant charging.


snipped.....

>The inductor is also going to be physically big.


This depends, I measured the inductance of my homemade transformer
before I put it on the core, and it is 7 Henry. This is a half
secondary, putting out 10 kV.

It can be seen here:
http://home5.inet.tele.dk/f-hammer/tesla/tesla.htm
go to "homemade pig", I can supply further info if needed, but in my
view, making an air-core HV choke for a DC system doesn`t pose any major
problem, other than determining the suitable size in Henries.

Cheers, Finn Hammer


snipped....

• Prev: Re: 7200 V too low?
• Next: Re: Dump the Lump
• Index(es):
  • Main
  • Thread