RE: 7200 V too low?

• To: tesla@pupman.com
• Subject: RE: 7200 V too low?
• From: "Howden, Brian FOR:EX" <Brian.Howden@gems1.gov.bc.ca> (by way of Terry Fritz <twftesla@uswest.net>)
• Date: Thu, 13 Apr 2000 23:36:34 -0600
• Approved: twftesla@uswest.net
• Delivered-To: fixup-tesla@pupman.com@fixme

I would assume you could use two of these and put them in series for a
center tapped 14.4 kv xformer.  (similar to seriesing MOTs)
Brian Howden

-----Original Message-----
From: Tesla List [mailto:tesla@pupman.com]
Sent: Thursday, April 13, 2000 10:31 AM
To: tesla@pupman.com
Subject: 7200 V too low?


Original Poster: "Nathan Ball" <nateburg@hotmail.com> 

Hi everyone

Checking with my dad's power company, all of the distribution transformers 
in my town are at 7200 V.  I may still be able to get one if i'm persistant,

but is 7200 going to run an appx. 3 kVA coil OK, or should I look for a 
14.4?

Thanks,
Nathan
______________________________________________________
Get Your Private, Free Email at http://www.hotmail.com

• Prev: Another obnoxious lumped theory supporting post ;-))
• Next: Re: solid state spark gaps?
• Index(es):
  • Main
  • Thread